Development engineers Rie Kaneko and Torsten Hensel discuss the structure of the lightweight comfort seat using a cross-section model. By means of the e-textile technology used, the seat heating can be directly embedded in the textile and is thus close to the body. Elastoflex® flexible foams in the sitting areas save up to 20 percent weight and at the same time provide ergonomic advantages by means of various hardness zones. Print free of charge. Copyright by BASF.
Performance Polymers

Performance Polymers

Injection Molding Troubleshooter

The demands on the quality of injection-molded components made from engineering thermoplastics have become ever more stringent in the past few years. This is due to the higher quality awareness among end consumers. In addition, technically sophisticated moldings are becoming more of a requirement in today’s projects.

This easy to use troubleshooting guide gives you initial advice for solving injection molding difficulties.
Please click on the name of your problem in the following list to view a detailed description including photograph and proposals for solution:

Information and recommended applications are not binding and are based on experience, while BASF uses reasonable efforts to include accurate, complete, and up-to-date information. A legally binding assurance of accuracy, completeness and timeliness in connection with an introduced problem or any other warranties and/or promises cannot be derived from them. The access and use of this site is at the user's own risk. BASF is not responsible and disclaims any liability for any damages, including without limitation, direct, indirect, incidental, consequential and special damages, alleged to have been caused by or in connection with the access and/or use of this site. BASF may modify and/or discontinue operation of all or portions of this site at any time in its sole discretion without notice.

BASF Performance Materials takes a proactive approach to processing. We want to get it right, right from the start. Our engineers perform mold fill analyses and draw on one of the industry's most extensive data banks, which correlates material and design data with actual molding and part performance results. In addition, our technical support engineers go on-site to ensure successful startup and processing. If someone has trouble with a part, we'll troubleshoot, performing root cause investigation and analytical testing, to arrive at a solution for them.


We support as follows:

  • Injection Molding
  • Two-Shot Injection Molding
  • Gas-Assist Injection Molding
  • Overmolding
  • Extrusion
  • Blow Molding
  • Rotomolding

Consult with an expert

Industry*
Location*