Electronics & Electric

Elastocoat^®(PU) – A coat that's here to spray

For coating of surfaces, the high-tech Polyurea system Elastocoat^® is unbeatable. Whether used on parking decks, loading ramps or chemical tanks, Elastocoat^® Polyurea provides enduring protection. Also for facades and roofs, Elastocoat^® provides lasting protection and is rapidly applied, too.

Elastocoat^®: However tough the punishment, our coatings last longer

Elastocoat^® is the high-tech spraying system from BASF for the reliable and lasting protection of all surfaces, be they of wood, concrete, bitumen or steel. The high-pressure spraying system can be applied to virtually all substrates with a corresponding primer and cures extra fast. While other materials take a long time to through-harden, Elastocoat^® is tack-free in just a few seconds and cures fully in two hours. With its properties, it is the ideal solution for many challenges – as a quick, efficient and lasting seal.

Benefits

The Advantages of Elastocoat^® for coating of floors, facades and roofs

Perfect surface seal
Cures in seconds
Adapts to any surface
Permanently elastic
Wear-resistant
Slip-resistant and noise-abating

More and more customers are using Elastocoat^®

BASF offers a variety of coating systems to suit the requirement profiles of different sectors of industry.

Elastocoat^® has established itself here as a true all-rounder in wide-ranging applications. With their high chemical resistance, high mechanical strength, electrical conductivity and differing degrees of slip resistance, these systems create a safe working environment when used on industrial floors and parking decks. Elastocoat^® masks concrete cracks, as it seals the surface long-term under a continuous membrane. It provides protection from penetrating water and, consequently, from concrete corrosion. This versatile coating bridges cracks and, as a seamlessly sprayed barrier coat, hugs the surface like a liquid skin. Curing in seconds, it effortlessly seals even complicated geometries and vertical surfaces.

Not only on land, but also on the water

Floors of container ships are highly stressed and pose a severe challenge for many materials – not so for Elastocoat^®. The spray skin is seamlessly applied and thus prevents delamination and cracking, stays abrasion-resistant and withstands moisture and temperature fluctuations.

Coatings for load beds and loading surfaces

With Elastocoat^® spray foam, previously slippery truckload beds can be coated trouble-free for long-term slip and wear resistance. The system cures rapidly, is scratch-resistant and insulates against noise. Loads mostly no longer have to be additionally secured. This saves time and money and makes Elastocoat^® the No. 1 choice if you need a durable and high-speed seal.

Even the best facade should be safeguarded with a BASF coating behind it

A coat of Elastocoat^® is still the best safeguard against concrete corrosion, long-term structural weakness and moisture. As a liquid film, this system wraps itself with ease around even complicated surfaces like roof projections, dome lights and shafts, creating a seam- and jointless seal.

A coat of Elastocoat^® also pays off for the protection not only of facades, but also of roofs. Flat roofs are often prone to leakage. The easy-to-spray coating gives the roof a jointless watertight seal that will even withstand icy temperatures of down to minus 50 degrees.

An impressive example is the roof of the arena in Astana, Kazakhstan with a surface area of 10,000 square meters and space for 30,000 spectators. This is where the developers opted for Elastocoat^® from BASF. Moreover, for good reason, as the spray coating adapts seamlessly to the movement and tension of the surface, thus preventing cracking. It is also waterproof, very durable, abrasion-resistant, insensitive to temperature fluctuations and humidity and absolutely chemical-resistant. Therefore, if you happen to be in Astana in 2030 for the Expo, you will be able to see for yourself how well Elastocoat^® has withstood the test of time.

Enduring protection of all surfaces with Elastocoat^®

Roof Sealings

Elastocoat^® Keeps Roofs Tightly Sealed

Complicated roof penetrations, skylights, or air-conditioning shafts are trouble-spots for leaks. Elastocoat^® seals the affected areas. Like a liquid film, Elastocoat^® adapts itself evenly over the surface geometry of the roof and covers it seamless and durable. After preparing the surface the high-tech polyurea system is sprayed onto the roof. It covers and seals vertical areas and it cures in a few seconds.

Facts on roof sealing with Elastocoat^®

Extremely fast curing; load-bearing after one hour
High tolerance of temperature and humidity during application
Seamless sealing of penetrations and undercuts
High adhesion to the surface and primer
High degree of crack bridging, over 400% elongation at break
High resistance to hydrolysis and aging
Outstanding mechanical and chemical resistance

Elastocoat^® is certified for flat roof sealings according to ETAG005-6.

Parking Decks

Elastocoat^® Protects Parking Decks from Corrosion

Multi-storey car parks are concrete and steel structures with an exposed outdoor deck on top and covered indoor decks beneath. Therefore, durable top sealing of the decks is essential. Elastocoat^® is applied directly onto the prepared surface by portable spray machines and is accessible after short time.
Elastocoat^® can be sprayed as a seamless membrane and is crack-bridging by flexible adaptation to concrete movements.

Elastocoat^® is certified for parking decks according to OS11a.

Properties of Elastocoat^® Sealing for Parking Decks

Seamless and waterproof
Durable and abrasion resistant
Crack bridging by flexible adaptation to concrete movements
Chemically resistant, even to liquids from vehicles and engines
Tolerant to humidity and temperature at application
Fast curing, rapidly getting surface back to service

Secondary Containments

Elastocoat^® is certified for storage tanks according to WHG19.

Elastocoat^® Seals Secondary Containments

To prevent chemical storing tanks from leaking into ground water, most of these tanks are placed on or into areas called secondary containments. These are made of concrete. To prevent cracks and leakage, a lining system needs to be installed. Elastocoat^® is widely used throughout many industries where aspects such as surface protection, chemical resistance, crack bridging, as well as durability play a major role.

Polyurea: One of the Most Promising Lining Systems

Elastocoat^® can be sprayed as a seamless membrane even on and into complex structures. Its moisture tolerant chemistry allows installation of the membrane at weather conditions with high humidity and low temperatures, where traditional materials fail.

Lining systems often need to be installed mandatory by law, e. g. for storage areas, such as the PGS 15 guideline in the Netherlands and the approval in accordance with WHG in Germany.

Properties of Elastocoat^® for Secondary Containments

Seamless even on complex structures
Very good chemical resistance
Excellent crack bridging properties
Anti-skid surface finish
Easy to coat even on vertical structures
Fast curing
Free of solvents and catalysts
certified according to WHG 19

Leaking Tanks!

Elastocoat^® seals secondary containments.

Download Flyer

Loading Areas

Elastocoat^® Gives Grip and Stops Noise

Trucks being loaded or unloaded often cause high levels of noise. Unfortunately such banging and clattering occurs in densely populated areas in the evening or even at night. Sound-absorbing Elastocoat^® reduces the absolute noise level to just 54 dBA. Known as "silent floor" loading surfaces of trucks coated with Elastocoat^® C comply with the PIEK resolution. This law, the Dutch government came up with, stipulates sound levels to be limited at 60 dBA.

Silent, Durable and Grippy Trailer Floors

The whisper trailer floor is hard-wearing, too. Elastocoat^® is optimized for these specific needs. Sprayed as a 5mm thin layer, it prolongs the life span of trailer floors.

As anti-slip flooring polyurea works as well. The load adheres to the rough surface, giving good grip. This mostly saves additional time-consuming load securing.

Elastocoat^® has been testet by DEKRA in accordance with VDI 2700.

Properties of Elastocoat^® for Loading Areas

Reduced noise level meets Dutch law requirements
Longer lifetime of trailer floor
Excellent abrasion resistance
Simple to clean, recommended for HACCP
Speedy return to service
Chemical resistance to cleaning agents
High grip

Rumble, Clatter, Bang: What a Racket!

Elastocoat^® C stops noise pollution.

Download Flyer

Sewer Shafts

Protection Against Corrosion and Durable Sealing with High-tech Polyurea

Biogenic sulphuric acid generated by the bacteria Thiobacillus in gas-sealed manholes rapidly leads to heavy concrete corrosion. Washed concrete appearance and decomposed metal components are typical signs of damage such as corrosion, crack formation and leakage. The result can be instability of the structure as well as infiltration.

Attack by acids can be stopped by the seamlessly sprayed barrier film of 2K Polyurea Elastocoat^®.

Curing in seconds, the "liquid film" moulds itself to all shapes of surface (zoom in to read more).

Elastocoat^® Repairs and Protects Sewer Shafts

Chemically resistant to biogenic sulphuric acids
High degree of crack bridging, 400 % elongation at break
Outstanding tensile and tear strength
Extremely rapid curing – load-bearing after just an hour
High tolerance to temperature and humidity during application
Seamless repair of cracks and undercuts
Outstanding adhesion to surface
High resistance to hydrolysis and ageing
Free of solvents and catalysts

It's Hard Life Underground!

Elastocoat^® C repairs and protects from corrosion.

Download Flyer

Download Center

More Information

All information in one place: From technical articles, case studies and brochures, to data sheets and certificates.

Information & Certificates

Declaration of Performance

Your Product Support

All Declarations of Performance (DoP)

Tailor-made Solutions

Tailor-made for individual needs: We support our customers in developing application-oriented solutions.

Consult with an expert

Your message*

First name*

Last name*

Business Email*

Company*

Phone

Industry*

Location*

Join our mailing list and be first to hear about webinars and events, new whitepapers product innovations etc. about BASF performance polymers products.

I agree that BASF SE and its affiliated companies (“BASF”) can contact me via email for the purpose of informing me about BASF products, services and events which BASF considers relevant for me and conducting customer surveys. In order to determine which information is relevant for me, BASF may collect and analyze information about my professional needs and interests (including those derived from my interactions with these marketing messages) and from my overall customer relationship with BASF. Further details about the scope of my consent and about my right to withdraw it at any time can be found here. Information on the processing and protection of personal data within BASF can be found under: Data Privacy Policy

Elastocoat^®(PU) – A coat that's here to spray

Elastocoat^®: However tough the punishment, our coatings last longer

The Advantages of Elastocoat^® for coating of floors, facades and roofs