Performance Polymers

Single layer, high barrier, low THF migration: Sustainable Ultradur^® grades for packaging

Ultradur^® B1520 FC R01 is a specially developed high flowability PBT for packaging applications. Besides the well-known advantages of Ultradur^® – stiffness, strength, thermal stability and chemical resistance – the easy-flowing Ultradur^® variant offers more. Combined with other grades, like for example barrier or low THF migration, it even multiplies its performance. By having those special properties, Ultradur^® is the product of choice when it comes to coffee capsules.

Overview

Ultradur^® B1520 FC R01 at a glance:

Easy flowing PBT grade
Food contact approved
Excellent barrier properties:

OTR: 24 cm³ 100 μm / (m² d bar)

WVTR: 2,5 g 100 μm / (m² d 85% r.H.)

MVR: 110 cm³/10 min
High rigidity and strength
Chemical resistance
High stiffness suitable for thin-walled parts
Outstanding dimensional stability under heat (up to 200°C)

Looking for

Further Possibilities

Do you need help?

Can't find what you are looking for? Don't hesitate to contact us. We're here for you!

Our basic grade

The outstanding heat stability of Ultradur^® B1520 FC R01 allows sterilization and hot filling. The shape of the stiff and stable thin walled injection-molded packaging can be freely chosen due to its excellent barrier properties. There is no need for a 100 % complete labeling to provide a barrier. The easy processing of Ultradur^® enables the usage on standard filling lines. Ultradur^® B1520 FC R01 is certified for food contact, which makes this grade suitable for thin-walled (injection-molded) packaging for cosmetics and food products.

Our new Ultradur^® grades with even better properties!

You've got the choice:
Choose the material out of our extended portfolio that suits your requirements best!

Our new grades come with special properties. Just as the basic grade, both of the new ones are food contact materials ("FC" = food contact).

But that's not all! On top of that, they are also characterized by a low THF migration ("LM" = low migration). Convince yourself of the properties:

Protection against moisture and oxygen

Ultradur^® B1520 FC R01 is the product of choice when it comes to single layer aroma sealed packaging. The well balanced barrier properties against moisture and oxygen make a secondary packaging redundant. Thus, the new capsules have great advantages compared to other injection-molded or multilayered thermoformed capsules. And on top – due to the high stiffness of Ultradur^® the capsules can be very thin which is a prerequisite for economic and ecological production.

Ultradur^® keeps food fresh longer

After using another material, the delicatessen manufacturer Gautschi switched to PBT tubs made of Ultradur^® B1520 FC R01. In this new PBT variant, products stay fresh considerably longer, as Gautschi confirms. The excellent barrier properties of this new PBT material against moisture and oxygen also efficiently help to retain the aroma.

Barrier

Our Barrier grade will keep the oxygen out of your capsule, keeping your coffee as fresh as just ground!

Ultradur^® B1520 FC LM - the performance grade

THF migration

The new grade exceed the already good migration properties of the basic grade (see on the right).

Ultradur^® Barrier B1520 FC LM - the performance & barrier grade all in one

Barrier

The barrier properties enable a
O₂ concentration level of a maximum at 0,1% after 360 days.

We offer: Our product + our Ultrasim^® design calculation

You get: Less material and production costs + more efficiency

Productivity

With Ultrasim, the efficiency can easily be boosted by reducing the capsule's weight!

Further possibility for you to focus on sustainability.

Sustainability

With our different sustainable approaches for products, you can easily save CO₂!

Information on Processing

Melt temperatures: 260 – 280°C, preferred 275°C
Mold temperatures: 20 – 60°C, preferred 40°C
Moisture and drying: Max moisture content granulate: 0,04%; Predrying of granulate with dry air dryer or vacuum dryer: 80°C - 120°C, 4h
Plasticizing: Peripheral screw speed: max 0,25 m/s; Dosing: max 1-2 x screw diameter
Screw Design: Single-flighted, shallow-cut three-section screws having a L / D ratio of 20 - 23 are suitable for processing Ultradur^®.
Hot Runner: Good thermal insulation necessary, recrystallization temperature of PBT is about 202°C, therefore material freezes at higher temperature level in comparison to e.g. PP, open nozzle or shut-off nozzle.

Product samples

Cups Injection Molding

Measures: 55 x 70 mm
Wall thickness: 0,7 mm
Flow length: 100 mm
Center gated
Cold runner
Sprue gate: 4mm

Container Injection Molding

Measures: 210 x 135 x 45 mm
Wall thickness: 0,5 mm
Flow length: 140 mm
Center gated
Hot runner
Hot runner nozzle: 1,5mm

Did you miss our talk "New Ultradur® grades for thermoforming and injection-molding applications with tailor-made property profiles"?

Just watch the recording here

We want to reassure that we’re still welcoming your questions and requests. Therefore, don’t hesitate to contact us directly via the contact formular at the end of the site.

Download Center

More Information

All information in one place: From technical articles, case studies and brochures, to data sheets and certificates.

Information & Certificates

Consult with an expert

Self-service solutions: Downloads Finders

Your message*

First name*

Last name*

Business Email*

Company*

Phone

Industry*

Location*

Join our mailing list and be first to hear about webinars and events, new whitepapers product innovations etc. about BASF performance polymers products.

I agree that BASF SE and its affiliated companies (“BASF”) can contact me via email for the purpose of informing me about BASF products, services and events which BASF considers relevant for me and conducting customer surveys. In order to determine which information is relevant for me, BASF may collect and analyze information about my professional needs and interests (including those derived from my interactions with these marketing messages) and from my overall customer relationship with BASF. Further details about the scope of my consent and about my right to withdraw it at any time can be found here. Information on the processing and protection of personal data within BASF can be found under: Data Privacy Policy

Single layer, high barrier, low THF migration: Sustainable Ultradur® grades for packaging

Ultradur® B1520 FC R01 at a glance: